Bond & Seal

PREPARATION:

1. Do not apply mascara before or after Falscara.


2. Brush a light coat of BOND on natural lashes.


3. Use the included APPLICATOR to pluck a WISP from the tray. Pick up a WISP from the middle-outer end for optimal control.

APPLICATION:

1. Gently place the WISPS underneath the base of your natural lashes, slightly away from the waterline.


2. Apply wisps starting from the outer corner of lash line, working inwards.


3. Dab a thin coat of SEAL under WISPS to eliminate any sticky residue and hold WISPS in place.


4. After applying SEAL under WISPS, use the APPLICATOR or your fingers to squeeze the WISPS against your natural lashes.

REMOVAL:

1. Saturate a cotton pad with Falscara REMOVER or oil-free makeup remover.


2. Place pad over eyes for 10 seconds, then gently wipe or peel off WISPS and BOND and SEAL.

BOND Ingredients: Acrylates/Ethylhexyl Acrylate Copolymer, Butylene Glycol, Alcohol Denat., Water, AMP-Acrylates Copolymer, Phenoxyethanol, Citric Acid, Sodium Carbonate, Sorbitol, Ceteareth-25, Ethylhexylglycerin, Urea, Disodium Phosphate, Biotin, Black 2 NET WT 4.5 g (0.15 oz.)

SEAL Isododecane, Water, Copernicia Cerifera (Carnauba) Wax, VP/Eicosene Copolymer, Euphorbia Cerifera (Candelilla) Wax, Ceresin, Trimethylsiloxysilicate, VP/VA Copolymer, Panthenol, Hydrogenated Polyisobutene, PEG-60 Hydrogenated Castor Oil, Phenoxyethanol, Polypropylsilsesquioxane, 1,2-Hexanediol, Ethylhexylglycerin, Tocopheryl Acetate NET WT 4.5 g (0.15 oz.)